此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Contact Us

ADD:Hubei Shiyan Liuliping

TEL:0719-5717236

MAIL:hbzmsy@126.com

WEB:http://www.syzmsy.com

position: Home > News >

Ductile iron castings after high temperature annealing heat

Date:2015-03-10 10:33Source:www.syzmsy.com Writer:Zhiming Click:times
Our foundry performed high temperature annealing heat treatment to ductile iron castings, in order to remove massive free carbide, improve elongation (toughness), improve welding property, remove inverse chill defects, reduce hardness, and make the material more uniform. 

Ductile iron fragile and solution:

Ductile iron is good because it has good elongation, so is very tough, however, for some ductile iron castings with thin wall thickness, low production temperature outside, there may be some problems with the material, such as extra high hardness, fragile because of inverse chill defects, and poor welding property. All these problems are difficult to be solved by adjustment of casting process, so further heat treatment will be necessary.

High temperature annealing heat treatment is a very good heat treatment to solve these problems. We introduce a mature annealing heat treatment process. 100 degree per hour to "A" Celsius degree, then keep for "B" hours, then reduces temperature in the furnace to "C" degree, and then pull the castings out of furnace. (As for ABC, they are our technical data, so we are not convenient to reveal them in this article.)

Heat treatment result:

After heat treatment, we found the mechanical properties and metallographic structures have been improved significantly. 

1. Elongation has been increased largely. Could be improved from 12% to 20%, however, their tensile strength was not reduced as theoretical estimation.
2. Inverse chill defects have been solved. Hardness has been reduced largely.
3. Free carbide has been removed, so welding property has been improved too. 

In conclusion, material has become more tough and soft. All properties have been improved significantly. 

Because our ZHIMING COMPANY checked the inverse chilling areas on the samples directly, not inspected the single specimen, so the photos are not clear enough. If you want to learn more information, please feel free to contact syzmsy@126.com.

Copyright 2012-2013 © Shiyan Zhimingshiye DevelopingCo., Ltd.. All rights reserved.   鄂ICP备12009331号-1

ADD:Hubei Shiyan Liuliping     TEL:86-719-5717236